Skip to main content
Version: v1.1

Upgrade from v1.1.0/v1.1.1 to v1.1.2

danger

Please do not upgrade a running cluster to v1.1.2 if your machine has an Intel E810 NIC card. We saw some reports that the NIC card has a problem when added to a bonding device. Please check this issue for more info: https://github.com/harvester/harvester/issues/3860.

General information​

Once there is an upgradable version, the Harvester GUI Dashboard page will show an upgrade button. For more details, please refer to start an upgrade.

For the air-gap env upgrade, please refer to prepare an air-gapped upgrade.

Known Issues​

1. An upgrade is stuck when pre-draining a node​

Starting from v1.1.0, Harvester will wait for all volumes to become healthy (when node count >= 3) before upgrading a node. Generally, you can check volumes' health if an upgrade is stuck in the "pre-draining" state.

Visit "Access Embedded Longhorn" to see how to access the embedded Longhorn GUI.

You can also check the pre-drain job logs. Please refer to Phase 4: Upgrade nodes in the troubleshooting guide.

2. An upgrade is stuck when pre-draining a node (case 2)​

An upgrade is stuck, as shown in the screenshot below:

And you can also observe that multiple nodes' status is SchedulingDisabled.

$ kubectl get nodes
NAME    STATUS                     ROLES                       AGE   VERSION
node1   Ready                      control-plane,etcd,master   20d   v1.24.7+rke2r1
node2   Ready,SchedulingDisabled   control-plane,etcd,master   20d   v1.24.7+rke2r1
node3   Ready,SchedulingDisabled   control-plane,etcd,master   20d   v1.24.7+rke2r1

3. An upgrade is stuck in upgrading the first node: Job was active longer than the specified deadline​

An upgrade fails, as shown in the screenshot below:

4. After an upgrade, a fleet bundle's status is ErrApplied(1) [Cluster fleet-local/local: another operation (install/upgrade/rollback) is in progress]​

There is a chance fleet-managed bundle's status is ErrApplied(1) [Cluster fleet-local/local: another operation (install/upgrade/rollback) is in progress] after an upgrade. To check if this happened, run the following command:

kubectl get bundles -A

If you see the following output, it's possible that your cluster has hit the issue:

NAMESPACE     NAME                                          BUNDLEDEPLOYMENTS-READY   STATUS
fleet-local   fleet-agent-local                             0/1                       ErrApplied(1) [Cluster fleet-local/local: another operation (install/upgrade/rollback) is in progress]
fleet-local   local-managed-system-agent                    1/1
fleet-local   mcc-harvester                                 1/1
fleet-local   mcc-harvester-crd                             1/1
fleet-local   mcc-local-managed-system-upgrade-controller   1/1
fleet-local   mcc-rancher-logging                           1/1
fleet-local   mcc-rancher-logging-crd                       1/1
fleet-local   mcc-rancher-monitoring                        1/1
fleet-local   mcc-rancher-monitoring-crd                    1/1

5. An upgrade stops because it can't retrieve the harvester-release.yaml file​

An upgrade is stopped with the Get "http://upgrade-repo-hvst-upgrade-mldzx.harvester-system/harvester-iso/harvester-release.yaml": context deadline exceeded (Client.Timeout exceeded while awaiting headers) message:

We have fixed this issue in v1.1.2. But for v1.1.0 and v1.1.1 users, the workaround is to start over an upgrade. Please refer to Start over an upgrade.

6. An upgrade is stuck in the Pre-drained state​

You might see an upgrade is stuck in the "pre-drained" state:

This could be caused by a misconfigured PDB. To check if that's the case, perform the following steps:

  1. Assume the stuck node is harvester-node-1.

  2. Check the instance-manager-e or instance-manager-r pod names on the stuck node:

    $ kubectl get pods -n longhorn-system --field-selector spec.nodeName=harvester-node-1 | grep instance-manager
    instance-manager-r-d4ed2788          1/1     Running   0              3d8h

    The output above shows that the instance-manager-r-d4ed2788 pod is on the node.

  3. Check Rancher logs and verify that the instance-manager-e or instance-manager-r pod can't be drained:

    $ kubectl logs deployment/rancher -n cattle-system
    ...
    2023-03-28T17:10:52.199575910Z 2023/03/28 17:10:52 [INFO] [planner] rkecluster fleet-local/local: waiting: draining etcd node(s) custom-4f8cb698b24a,custom-a0f714579def
    2023-03-28T17:10:55.034453029Z evicting pod longhorn-system/instance-manager-r-d4ed2788
    2023-03-28T17:10:55.080933607Z error when evicting pods/"instance-manager-r-d4ed2788" -n "longhorn-system" (will retry after 5s): Cannot evict pod as it would violate the pod's disruption budget.

  4. Run the command to check if there is a PDB associated with the stuck node:

    $ kubectl get pdb -n longhorn-system -o yaml | yq '.items[] | select(.spec.selector.matchLabels."longhorn.io/node"=="harvester-node-1") | .metadata.name'
    instance-manager-r-466e3c7f

  5. Check the owner of the instance manager to this PDB:

    $ kubectl get instancemanager instance-manager-r-466e3c7f -n longhorn-system -o yaml | yq -e '.spec.nodeID'
    harvester-node-2

    If the output doesn't match the stuck node (in this example output, harvester-node-2 doesn't match the stuck node harvester-node-1), then we can conclude this issue happens.

  6. Before applying the workaround, check if all volumes are healthy:

    kubectl get volumes -n longhorn-system -o yaml | yq '.items[] | select(.status.state == "attached")| .status.robustness'

    The output should all be healthy. If this is not the case, you might want to uncordon nodes to make the volume healthy again.

  7. Remove the misconfigured PDB:

    kubectl delete pdb instance-manager-r-466e3c7f -n longhorn-system